| No. | OEM Ref No. | Description |
| 801 | M03-1007-010 | CPLG, HALF |
| 802 | 123584-2 | SET, PACKING, 4“WASHPIPE |
| 803 | 30175768-MECH | FILTER-ASSY,25-MICRON |
| 804 | 80-502-100 | BLAK-JAK LOAD-CELL |
| 805 | 300/04/003 | AIR PRESSURE REGULATOR |
| 806 | 300/04/005 | CONTROL VALVE |
| 807 | 30160658-SK | SEAL KIT |
| 808 | 108894-P40 | PISTON SEALS |
| 809 | 108894-G13 | SEAL KIT;ROD;BRONZE,GLAND;MATL BUNA-N |
| 810 | 108894-L32 | SEAL,PISTON LIP |
| 811 | 30171788 | VALVE, DIRECTIONAL |
| 812 | 30160732-1 | BEARING, ROLLER |
| 813 | 30160731 | BEARING, ROLLER |
| 814 | 30160734 | BEARING, BALL |
| 815 | 30160733 | BEARING, BALL |
| 816 | 94518-23HN | VALVE, COUNTERBALANCE INTERNALLY BRAIDED |
| 817 | 107029-375N | CARTRIDGE VALVE |
| 818 | 93547-2B75N | CHECK VALVE CART, PILOT TO OPEN, TDS |
| 819 | 94536-330N | CHECK VALVE, FLOW 1＞2, 30PSI |
| 820 | 30160729-SK | KIT, SEAL, HYDRAULIC MOTOR |
| 821 | 82749 | ELEMENT, FILTER, TDS |
| 822 | 85616 | O-RING;-151, SAE AS568;MATL BUNA-N |
| 823 | 94536-175N | CARTRIDGE, CHECK, 75PSI, PHM3I |
| 824 | 94522-1AN | RELIEF VALVE CARTRIDGE, DIRECT ACTING |
| 825 | 110103-500 | UPPER IBOP, PH50 ASSY |
| 826 | 114706-500 | ASSY, LWR IBOP, 65/8X65/8 |
| 827 | 30173216-1 | KIT, FILTER, HYDRAULIC-OIL(FILTER) |
| 828 | 222606 | 6IN FIGURE 2202 UNION |
| 829 | 30155842 | SENSOR, ENCODER;ABSOLUTE;HOLLOW SHAFT;PP |
| 830 | 30154120 | VALVE,TOGGLE,SHORT |
| 831 | 80000445 | DIE, WRENCH, TORQUE |
| 832 | 30160623-2 | BEVEL GEAR |
| 833 | M361005968 | CROWN WHEEL |
| 834 | M361005967 | TRANSITION GEAR |
| 835 | M361003988 | LOCKING RING, UPPER |
| 836 | 76951 | GATE F2”MUD VALVE MV75 |
| 837 | 76949 | VALVE MUD GATE BOOT 2” MV75 DI +NN |
| 838 | 76948 | SEAT SUPPORT RING |
| 839 | 76956 | O-RING |
| 840 | 117782 | PIN, JOINT, 2.0DIAX12.5, MS28 |
| 841 | 84882-5 | INDUCTIVE PROXITIVE SENSOR 2-MET.CABLE |
